Splitters and Amplifiers

CATV Digital Splitters Series ensure the highest quality signal distribution for current HDTV, DOCSIS Data, Digital Voice, and future interactive Broadband networks.

Features and Benefits
o Consistent, high RF performance from 5-1000MHz through extreme temperatures.
o Enhanced 15-42MHz return path for superior output return loss and port to port isolation performance.
o 6kV ring wave surge protection on all ports, 6kV surge withstand, guaranteed second order harmonics performance after 5 surges to each port of 6kV (per IEEE. C62.41.1991 Category A3).
o Ultra linear ferrites prevent inter-modulation where high level return carriers can affect forward path performance.
o 360° gold plated center conductor pin enhanced 360° contacts engineered for maximum conductor contact and superior retention.
o Gold-plated, copper construction for prevention of common path distortion, impedance.
o 6 kV High grade voltage blocking capacitors on all ports to eliminate core saturation.
o Solid Zinc cast housing with bright Tin triple plating for durability in all environments.
o Universal drive mounting and ground port screws packaged with each splitter.
o Sealed ports to prevent moisture ingress to 15 PSI.
o Meets or exceeds ANSI/SCTE 153 2008 for outdoor use.
o Superior intermodulation distortion and second harmonic performance.
o Excellent return loss and port-to-port isolation in the return band.
o Tin-plated copper back plate provides minimum -130dB shielding effectiveness and superior defense against long-term corrosion factors.
o Weather-sealed “F” ports.
o Machine threaded flat “F” ports.

ComponexX HPNA splitters are perfect for HPNA environments, enabling simultaneous transmission of data and voice signals through frequency division multiplexing on the same wire pair, all without any risk of signal interference.

This setup eliminates the need for rewiring in dwellings, MDUs, or business premises, as information can be transmitted over existing wires. With low port-to-port isolation, HPNA communication signals pass through the splitters to set-top boxes with minimal signal loss. Additionally, theses HPNA series splitters offer excellent return loss and isolation for in-band frequencies other than HPNA.

Features and Benefits
o 360° gold plated center conductor pin enhanced 360° contacts engineered for maximum conductor contact and superior retention.
o Gold-plated, copper construction for prevention of common path distortion, impedance.
o Solid Zinc cast housing with bright Tin triple plating for durability in all environments.
o Universal drive mounting and ground port screws packaged with each splitter.
o Sealed ports to prevent moisture ingress to 15 PSI.
o HPNA Compatible.
o Expanded Pass Band (for future communication channels).
o Meets or exceeds ANSI/SCTE 153 2008 for outdoor use and environmental and Mechanical Requirements.
o Excellent return loss and port-to-port isolation in the return band (for HPNA communications).
o Tin-plated copper back plate provides minimum -130dB shielding effectiveness and superior defense against long-term corrosion factors.
o Weather-sealed “F” ports.
o Machine threaded flat “F” ports.
o Operating temperature -40°C to +60°C.
o Corrosion resistance, 1000 Hours of salt spray per ANSI/SCTE 143 2007.

 1GHz Digital-1 CATV Mini Amplifier Passive Return
o Mini size with excellent performance and low power consumption.
o Compact design based on patented power isolation.
o E-Phemt GaAs technology.
o Compliant with ANSI/SCTE 161 2009.
o Machined brass F ports with 360°, 4 prong centre contact with pull-off force 650g.
o Zink allow housing. Nickel plated.
o Waterproof F ports to meet IEC529, IP67 standards (15psi).
o Surge withstanding test procedure complies with ANSI/SCTE 161 2009.
o 1KV blocking capacitors on all RF ports for DC/hum protection.
o Low noise figure.
o Supports both local and remote powering.
o Regulator IC allows wide input voltage range 9-20VDC.
o LED power indicator.
o Low power consumption: 95mA±10mA(1.2W).
o 12VDC power adapter is UL/cUL listed and compliant with IEEE587 C62.41-1991 Cat B3 surge withstanding

1GHz CATV Mini Amplifier Passive Return
o SCTE compliant mechanical and electrical performance ensures consistent integration and performance.
o Cast aluminum powder coated housing tested to withstand all seasonal elements (2000 hours salt fog).
o Pressure sealed and waterproof F-ports prevent moisture migration and condensation over temperature and climate change).
o Premium performance normalized sub-components offer very high resistance to spurious signals and second harmonics (greater than -45dB).
o Surge resistant up to 6kV per IEEE C62.41-1991 *B3 (combo wave 6000V, 3kA)
o Beryllium copper 360 degree seizure provides repeated superior connections (tested to SCTE requirements for outdoor products)
o 100 dB RFI shielding guarantees signals free from interference and localized noise
o UL approved power adaptor